Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4379
Title: MHSP with position detection capability
Authors: Luz, H. Natal da 
Veloso, J. F. C. A. 
Mendes, N. F. C. 
Santos, J. M. F. dos 
Mir, J. A. 
Keywords: Micro Hole and Strip Plate; Gas Electron Multiplier; X-ray detector; Position sensitive; Resistive charge division; Analogue division
Issue Date: 2007
Citation: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 573:1-2 (2007) 191-194
Abstract: The first implementation of a position sensitive readout for a Micro Hole and Strip Plate (MHSP) is described and tested. The readout consists on a resistive layer crossing the anodes and connected to a preamplifier on each side. By weighing the charge pulses on both preamplifiers it is possible to determine the interaction point. A 100-200 [Omega] resistance layer between consecutive strips was found to be the best compromise between position linearity and energy resolution. Preliminary results using 22.1 keV X-rays present a good linearity between the measured and the actual position with a mean deviation of about 0.15 mm and a position resolution of 1.6 mm full-width at half-maximum (FWHM), being limited by the analogue division electronic circuit. The performance of the MHSP position detector will be presented and discussed for 1D readout.
URI: http://hdl.handle.net/10316/4379
Rights: openAccess
Appears in Collections:FCTUC Física - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
file12c375b3ee464f77a6b033b87c9c9833.pdf353.88 kBAdobe PDFView/Open
Show full item record

Page view(s)

116
checked on Nov 13, 2019

Download(s)

117
checked on Nov 13, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.