Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4350
Title: A simple X-ray position detection system based on a MHSP
Authors: Luz, H. Natal da 
Veloso, J. F. C. A. 
Santos, J. M. F. dos 
Mir, J. A. 
Keywords: Micro-Hole and Strip Plate; Gas Electron Multiplier; 2D imaging; Resistive charge division; Analogue divider; X-ray detectors
Issue Date: 2007
Citation: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 580:2 (2007) 1083-1086
Abstract: A simple system for position detection based on a Micro-Hole and Strip Plate (MHSP) using a resistive charge division method was implemented. A thin resistive layer of about 100 [Omega] between each strip (top surface) and between each anode strip (bottom surface) allows us to obtain the actual position in both orthogonal directions. The readout electronics uses only two preamplifiers, a sum and a divider circuit to calculate the interaction point, in each dimension. For a detector filled with 1 atm of pure xenon, position resolutions of less than 300 [mu]m (FWHM) were achieved using 5.9 keV X-rays, for a signal-to-noise ratio (SNR) of 30. For these conditions, a detector gain of about 104 and an energy resolution of about 15% were obtained.
URI: http://hdl.handle.net/10316/4350
Rights: openAccess
Appears in Collections:FCTUC Física - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
file08d005c3c68d42c0991dccf6ab020164.pdf410.56 kBAdobe PDFView/Open
Show full item record

Page view(s)

99
checked on Nov 13, 2019

Download(s)

64
checked on Nov 13, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.