Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/4301
Title: An approach using thin films as a predictive way to produce new bulk materials
Authors: Vieira, M. T. 
Ramos, A. S. 
Trindade, B. 
Fernandes, J. V. 
Vieira, M. F. 
Keywords: Titanium aluminides; Film/bulk materials; Mechanical properties
Issue Date: 2000
Citation: Surface and Coatings Technology. 131:1-3 (2000) 162-166
Abstract: The aim of the present work is to produce (TiAl)-based films and characterise them in the as-deposited state and after several heat-treatment cycles with different holding times. The idea is to promote phase transformations of the films towards the intermetallic bulk materials. The structure and mechanical properties of binary films and films alloyed with silver were studied as a function of several heat treatment holding times at 600°C. The room temperature stresses were also evaluated and show that during annealing the stresses move from a compressive to a tensile state. The 18 h heat treatment leads to a sharp hardening of the binary film thought as resulting from a fine precipitation. After 162 h heat treatment the grain size increases, but the intrinsic stresses compromise the ductility results obtained.
URI: http://hdl.handle.net/10316/4301
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
filed0572cbbd51e45e39dd460decf7baf7b.pdf356.86 kBAdobe PDFView/Open
Show full item record

Page view(s) 50

330
checked on Oct 2, 2019

Download(s) 50

490
checked on Oct 2, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.