Please use this identifier to cite or link to this item:
Title: Mechanical characterization of composites prepared from WC powders coated with Ni rich binders
Authors: Fernandes, C. M. 
Senos, A. M. R. 
Vieira, M. T. 
Antunes, J. M. 
Keywords: Sputtering; Tungsten carbide; Coated powders; Mechanical properties
Issue Date: 2008
Citation: International Journal of Refractory Metals and Hard Materials. 26:5 (2008) 491-498
Abstract: In this study composite powders of WC and Ni/Fe/Cr were prepared in an innovative way, which consists of the sputter-deposition of the metallic binder onto the tungsten carbide particles. Compacts of coated powders were sintered by conventional vacuum sintering followed by hot isostatic pressing (HIP) to reach almost full densities. In order to evaluate the mechanical properties of reduced specimens size (microcomponents), depth-sensing indentation equipment was used. This method enabled the evaluation of the hardness, H, Young's modulus, E, and the yield stress, [sigma]y, in a non-destructive way, using only one sample. For the composites of sputter-coated WC-Ni/Fe/Cr the results showed an effective reduction of H and E due to the properties of Ni and the binder characteristics of the coated powders, such as uniform distribution and nanometer structure.
DOI: 10.1016/j.ijrmhm.2007.12.001
Rights: openAccess
Appears in Collections:FCTUC Eng.Mecânica - Artigos em Revistas Internacionais

Files in This Item:
File Description SizeFormat
filee50ed686775c4af9975961e6131ff0df.pdf811.38 kBAdobe PDFView/Open
Show full item record

Page view(s)

checked on Nov 26, 2020

Download(s) 50

checked on Nov 26, 2020

Google ScholarTM




Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.