Please use this identifier to cite or link to this item: http://hdl.handle.net/10316/15601
DC FieldValueLanguage
dc.contributor.authorAntunes, Elisabete-
dc.contributor.authorGarcia, Fernando A. P.-
dc.contributor.authorFerreira, Paulo-
dc.contributor.authorBlanco, Angeles-
dc.contributor.authorNegro, Carlos-
dc.contributor.authorRasteiro, M. Graça-
dc.date.accessioned2011-07-28T14:33:44Z-
dc.date.available2011-07-28T14:33:44Z-
dc.date.issued2008-07-22-
dc.identifier.issn0888-5885-
dc.identifier.urihttp://hdl.handle.net/10316/15601-
dc.description.abstractIn papermaking, mill water closure may result in a significant increase of inorganic salts in the white water. The effect of these contaminants on the performance of retention aids was evaluated, in this study, through flocculation of Precipitated Calcium Carbonate (PCC) with three very high molecular weight cationic polyacrylamides (C-PAM) of medium charge density and with different degrees of branching. Furth rmore, flocs resistance and reflocculation capacity was also investigated when different types of shear forces were applied. Tests were carried out in distilled water and in industrial water containing a high concentration of cationic compounds. The flocculation, deflocculation and reflocculation processes were monitored by evaluating particle size distribution using a light diffraction spectroscopy technique. Additionally to the effect of the cationic content of the medium, the influence of the flocculant dosage and degree of polymer branching were also studied. The effect of these parameters on the flocs structure was estimated by determining both the mass fractal dimension and the scattering exponent of the aggregates. The results show that the presence of inorganic salts affects significantly the performance of the polyelectrolytes. The flocculation kinetics is faster but the required flocculant dosage is higher when the suspending medium is industrial water. The cationic entities affect also the flocs structure because they reduce the reconformation of the polymer during flocculation. Additionally, in industrial water, flocs become more resistant and this effect is more pronounced as the flocculant branching decreases. In the case of the linear polymer, this effect is not so obvious because reconformation is less pronounced due to its molecular structure. Reflocculation capacity of flocs is very reduced both in distilled and industrial water.por
dc.language.isoengpor
dc.publisherAmerican Chemical Societypor
dc.rightsopenAccesspor
dc.titleEffect of Water Cationic Content on flocculation, flocs resistance and reflocculation capacity of PCC induced by polyelectrolytespor
dc.typepreprintpor
degois.publication.firstPage6006por
degois.publication.lastPage6013por
degois.publication.issue16por
degois.publication.titleIndustrial and Engineering Chemistry Researchpor
dc.relation.publisherversion10.1021/ie800326zpor
dc.peerreviewedYespor
degois.publication.volume47por
item.languageiso639-1en-
item.fulltextCom Texto completo-
item.grantfulltextopen-
crisitem.author.deptFaculdade de Ciências e Tecnologia, Universidade de Coimbra-
crisitem.author.parentdeptUniversidade de Coimbra-
crisitem.author.researchunitResearch Center for Chemical Processes and Forest Products-
crisitem.author.orcid0000-0002-4503-6811-
Appears in Collections:FCTUC Eng.Química - Artigos em Revistas Internacionais
Files in This Item:
File Description SizeFormat
PJF - IECR - 2008 - Versão pré-print.pdf169.41 kBAdobe PDFView/Open
Show simple item record

Page view(s)

172
checked on Sep 24, 2020

Download(s)

158
checked on Sep 24, 2020

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.