Please use this identifier to cite or link to this item:
|Title:||Application of FT-IR-ATR Spectroscopy to Evaluate the Penetration of Surface Sizing Agents into the Paper Structure||Authors:||Ferreira, Paulo J.
Gamelas, José A.
Moutinho, Isabel M.
Ferreira, Ana G. ItemCrisRefDisplayStrategy.rp.deleted.icon
Figueiredo, M. Margarida
|Issue Date:||15-Apr-2009||Publisher:||American Chemical Society||Citation:||Industrial & Engineering Chemistry Research. 48:8 (2009) 3867-3872||Abstract:||It is widely recognized that the surface properties of paper depend on the fibrous matrix and the final surface treatment applied to the paper. Regarding chemical paper surface treatments, an important issue is the evaluation of the penetration of chemical compounds into the fibrous matrix, as the chemicals can potentially cause changes in the intrinsic properties of paper. The work presented here aimed to use Fourier transform infrared (FT-IR) spectroscopy to study paper surface sizing, namely, the penetration of the sizing chemicals into the paper structure. Two different surface sizing formulations were applied to paper produced from Eucalyptus globulus bleached pulp (reference paper): both contain 90% (w/w) cationic starch, but one contains 10% (w/w) poly(styrene-co-maleic anhydride) whereas the other contains 10% (w/w) poly(styrene-co-butyl acrylate). The surface-sized paper sheets were further manually delaminated, so that the top surfaces as well as the internal layers could be analyzed by FT-IR spectroscopy. A non-surface-sized sample was taken as the reference. From the spectroscopic results, it was possible to detect the presence of the copolymers on the paper top surfaces, despite the application of only small amounts of these chemicals in the surface sizing. However, the chemicals were not found in the layers closest to the surface (30−40 μm from the top), leading to the conclusion that the penetration of the sizing formulations into the fibrous matrix was insignificant (at least up to this distance). Infrared spectroscopy data also showed that the calcium carbonate added as a filler was always present at higher concentration in the analyzed inner layers than at the top surface, for the reference paper as well as the sized papers.||URI:||http://hdl.handle.net/10316/10337||ISSN:||0888-5885||DOI:||10.1021/ie801765c||Rights:||closedAccess|
|Appears in Collections:||FCTUC Eng.Química - Artigos em Revistas Internacionais|
Show full item record
Files in This Item:
|Application of FT-IR-ATR Spectroscopy.pdf||137.53 kB||Adobe PDF||Request a copy|
checked on Feb 18, 2020
WEB OF SCIENCETM
checked on Nov 7, 2019
checked on Sep 24, 2020
checked on Sep 24, 2020
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.